Plastics waste recycling and pelletizing machines (RDF-5 RDF Plastic machine)

Plastics waste recycling and pelletizing machines (RDF-5 RDF Plastic machine):

• RDF-5 RDF PP, PE, HDPE, LDPE, PS, ABS, Film, Bottle Fragment
• German-made heavy gear box, high torsion, no noice; recycling material diversification and operation simply; temp. controls stability; double degassing, obenefit much higher than traditional model
• High torque
• Low noise
• Suitable for various kind of recycle materials
• Easy operation
• Stable temperature control
• Two vent hole
• Functions are much better than traditional one
• Enforced pressed material hopper for lightweight materials
• Main and Sub extruder to make your pellets more clean
• With two screener change, enable to change screener without stopping your machine, and reduce sub extruder change times, to bring up the capacity.
• The machine can have high capacity with lump shape, bottle recycled and masterbatch materials.

---

Force Feeder type cutting pelletizer RDF-5 RDF
-- Plastics waste recycling and pelletizing machines RDF-5 RDF

Force Feeder type cutting pelletizer:
Feature:

• PP, PE, HDPE, LDPE, PS, ABS, Film, Bottle Fragment
• German-made heavy gear box, high torsion, no noice; recycling material diversification and operation simply; temp. controls stability; double degassing, obenefit much higher than traditional model
• Enforced pressed material hopper
• Single extruder w/die-face cutting
• Suitable for PP, PE and etc.
• Easy operation
• With two screener change, enable to change screener without stopping your machine
• It is safer than the traditional pelletizing machine, no noise during the pelletizing.
• The machine can have high capacity with lump shape, bottle recycled and masterbatch materials.

---

Online Vedio Lateral Feeding Waste Recovery Machine RDF-5 RDF
-- Plastics waste recycling and pelletizing machines RDF-5 RDF

Lateral Feeding Waste Recovery Machine:
Feature:

• Suitable for PP, PE, PS and etc., Film, Shape plastic materials.
• Side entrance content up to 3000L, enable to storage more raw materials.
• With side entrance storage barrel enable to increase higher capacity for waste plastic material that contained water.
• With additional feeder machine, allow you to input different
• raw materials to mix up.

---

3IN 1 Two stages die-face cutting pelletizer
-- Plastics waste recycling and pelletizing machines

specifications - 3IN 1 Two stages die-face cutting pelletizer
3IN 1 Two stages die-face cutting pelletizer -- Plastics waste recycling and pelletizing machines:
Feature:

• The high speed shredder tunnel, shred materials into lump shape and increase capacity.
• The machine is control by the touch panel control box, when the machine is abnormal would give signal; you may then use this signal to maintain your machine.
• The two stages extruder die-face cut is for dirty materials
• Low noise during the shredder processing
• Metal detector avoid metals input to the shredder tunnel
• Easy to change knife than crusher

---

Online Vedio 3IN1 Single extruder 120mm pelletizer
-- Plastics waste recycling and pelletizing machines

specifications - 3IN1 Single extruder 120mm pelletizer

3IN1 Single extruder 120mm pelletizer -- Plastics waste recycling and pelletizing machines:
Feature:

• The high speed shredder tunnel, shred materials into lump shape and increase capacity.
  
• The machine is control by the touch panel control box, when the machine is abnormal would give signal; you may then use this signal to maintain your machine.
• The single stage extruder die-face cut is for clean materials
• Low noise during the shredder processing
• Metal detector avoid metals input to the shredder tunnel
• Easy to change knife than crusher

---

3IN1 Single extruder 175mm pelletizer
-- Plastics waste recycling and pelletizing machines

specifications - 3IN1 Single extruder 175mm pelletizer

3IN1 Single extruder 175mm pelletizer -- Plastics waste recycling and pelletizing machines
Feature:

• The high speed shredder tunnel, shred materials into lump shape and increase capacity.
  
• The machine is control by the touch panel control box, when the machine is abnormal would give signal; you may then use this signal to maintain your machine.
• The single stage extruder die-face cut is for clean materials
• Low noise during the shredder processing
• Metal detector avoid metals input to the shredder tunnel
• Easy to change knife than crusher

---

3IN1 Two stages spaghetti type
-- Plastics waste recycling and pelletizing machines

specifications - 3IN1 Two stages spaghetti type

3IN1 Two stages spaghetti type: -- Plastics waste recycling and pelletizing machines:
Feature:

• The high speed shredder tunnel, shred materials into lump shape and increase capacity.
• The machine is control by the touch panel control box, when the machine is abnormal would give signal; you may then use this signal to maintain your machine.
• The two stage extruder die-face cut is for dirty materials
• Low noise during the shredder processing
• Metal detector avoid metals input to the shredder tunnel
• Easy to change knife than crusher

---

3IN1 Two stages spaghetti type
-- Plastics waste recycling and pelletizing machines

specifications - 3IN1 Two stages spaghetti type

3IN1 Two stages spaghetti type -- Plastics waste recycling and pelletizing machines:
Feature:

• The vertical die-face cutting can save pull strip problem
• No noise during the pelletizing processing
• With additional feeder machine, allow you to input different raw materials to mix up.
• The knife has unique design of two level automatic adjusting and able to process high MI modulus materials. And it would not affect pellet cutting because of high low water content and high low temperature.
• More size-even pellets, better outlooks, and water content less than 0.01~0.03%
• Combination of shredder / Extruder / Pelletizer
• Smash and mix well, heating, dry
• High productivity, low noise
• Easy operation and low labor cost
• HDPE, LDPE, PP, PS, ABS, EVA

---

3-in-1 Waste Recovery Machine – 75mm

3IN1 die-face cutting is suitable for bag blowing and small factory waste recycling -- 3-in-1 Waste Recovery Machine – 75mm -- Plastics waste recycling and pelletizing machines:
Feature:

• The recycling machine dimension is small, save spaces, easy installation and operation. Air-cooled die-face method does not pollute surrounding environment.
• It is more easier than crusher when changing the knife set.

---

Side entrance two stages (die-face cutting) -- Plastics waste recycling and pelletizing machines

Side entrance two stages (die-face cutting):
Feature:

• The vertical die-face cutting can save pull strip problem
• Side entrance content up to 3000L, enable to storage more raw materials.
• With side entrance storage barrel enables to increase higher capacity for waste plastic material that contained water.
• The knife has unique design of two level automatic adjusting and able to process high MI modulus materials. And it would not affect pellet cutting because of high low water content and high low temperature.
• More size-even pellets, better outlooks, and water content less than 0.01~0.03%.

---

Side entrance two stages spaghetti type -- Side entrance storage barrel: suitable for PP, PE, PS and etc film shape materials. -- Plastics waste recycling and pelletizing machines

Side entrance storage barrel: suitable for PP, PE, PS and etc film shape materials. -- Plastics waste recycling and pelletizing machines：

Feature:
• The vertical die-face cutting can save pull strip problem.
• Side entrance content up to 3000L, enable to storage more raw materials
• Wit the side entrance storage barrel enables to increase higher capacity for waste plastic material that contained water.
• With additional feeder machine, allow you to input different raw materials to mix up.

---

Side entrance single (die-face cutting) -- Side entrance storage barrel: suitable for PP, PE, PS and etc film shape materials. -- Plastics waste recycling and pelletizing machines

Side entrance storage barrel: suitable for PP, PE, PS and etc film shape materials. -- Plastics waste recycling and pelletizing machines:

Feature:

• The vertical die-face cutting can save pull strip problem.
• Side entrance content up to 3000L, enable to storage more raw materials
• Wit the side entrance storage barrel enables to increase higher capacity for waste plastic material that contained water.
• With additional feeder machine, allow you to input different
raw materials to mix up.
• The knife has unique design of two level automatic adjusting and able to process high MI modulus materials. And it would not affect pellet cutting because of high low water content and high low temperature.
  
• More size-even pellets, better outlooks, and water content less than 0.01~0.03%.

---

Side entrance 135mm spaghetti type -- Side entrance storage barrel: suitable for PP, PE, PS and etc film, shape materials -- Plastics waste recycling and pelletizing machines

Side entrance storage barrel: suitable for PP, PE, PS and etc film, shape materials -- Plastics waste recycling and pelletizing machines:

Feature:

• Side entrance content up to 3000L, enable to storage more raw materials
• With the side entrance storage barrel enables to increase higher capacity for waste plastic material that contained water.
• With enforced pressed hopper allows the machine to input two kind of material.
• The machine can have high capacity with lump shape materials, bottle recycled and masterbatch.

GEOR DING MACHINERY No.3-1, Nanbei 2nd Rd., Dajia Town, Taichung County 437, Taiwan

Tel:+886-4-2688-8499／Fax:+886-4-2680-3355 E-mail:geor.ding@msa.hinet.net